for the delete

.vscode/settings.json

-{
-    "ansible.python.interpreterPath": "/bin/python"
-}
\ No newline at end of file

router1/router1_interface.txt

-Building configuration...
-
-Current configuration : 119 bytes
-!
-interface GigabitEthernet0/1
- ip address 10.10.20.169 255.255.255.248
- duplex auto
- speed auto
- media-type rj45
-end
\ No newline at end of file

router1/router1_ip.txt

-10.10.20.176
-10.10.20.176
-10.10.20.176
-10.10.20.176
-10.10.20.176

router1/router1_mask.txt

-29
-
-
-
-29
-

router1/router1_routingt.txt

-Codes: M - Manual static, A - AAA download, N - IP NAT, D - DHCP,
-       G - GPRS, V - Crypto VPN, C - CASA, P - Channel interface processor,
-       B - BootP, S - Service selection gateway
-       DN - Default Network, T - Tracking object
-       L - TL1, E - OER, I - iEdge
-       D1 - Dot1x Vlan Network, K - MWAM Route
-       PP - PPP default route, MR - MRIPv6, SS - SSLVPN
-       H - IPe Host, ID - IPe Domain Broadcast
-       U - User GPRS, TE - MPLS Traffic-eng, LI - LIIN
-       IR - ICMP Redirect
-Codes in []: A - active, N - non-active, B - BFD-tracked, D - Not Tracked, P - permanent
-
-Static local RIB for default 
-
-M  10.10.20.176/29 [1/0] via 10.10.20.170 [A]
\ No newline at end of file

router2/router2_interface.txt

-GigabitEthernet0/1 is up, line protocol is up 
-  Hardware is iGbE, address is 5254.0012.473f (bia 5254.0012.473f)
-  Internet address is 10.10.20.170/29
-  MTU 1500 bytes, BW 1000000 Kbit/sec, DLY 10 usec, 
-     reliability 255/255, txload 1/255, rxload 1/255
-  Encapsulation ARPA, loopback not set
-  Keepalive set (10 sec)
-  Auto Duplex, Auto Speed, link type is auto, media type is RJ45
-  output flow-control is unsupported, input flow-control is unsupported
-  ARP type: ARPA, ARP Timeout 04:00:00
-  Last input 00:00:35, output 00:00:01, output hang never
-  Last clearing of "show interface" counters never
-  Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
-  Queueing strategy: fifo
-  Output queue: 0/40 (size/max)
-  5 minute input rate 0 bits/sec, 0 packets/sec
-  5 minute output rate 0 bits/sec, 0 packets/sec
-     87 packets input, 33972 bytes, 0 no buffer
-     Received 16 broadcasts (0 IP multicasts)
-     0 runts, 0 giants, 0 throttles 
-     0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
-     0 watchdog, 0 multicast, 0 pause input
-     518 packets output, 62681 bytes, 0 underruns
-     0 output errors, 0 collisions, 2 interface resets
-     0 unknown protocol drops
-     0 babbles, 0 late collision, 0 deferred
-     0 lost carrier, 0 no carrier, 0 pause output
-     0 output buffer failures, 0 output buffers swapped out
\ No newline at end of file

router2/router2_ip.txt

-10.10.20.170
-10.10.20.170
-10.10.20.170

router2/router2_mask.txt

-29
-29